• Silibase Product

    Silibase is one of the leading & professional manufacturers specialized in producing all kinds of SILICONE BASED new materials.

  • Silibase Technique

    Silibase technique team always focus on quality first and insist on developing new products.

  • Silibase Service

    Silibase people will serve you the best before and after sale.

Chinese Factory Sell Silicone Super Wetter Analogue for Siltech A008UP -- 2023-08-01

Product Name: Silicone SurfactantItem No.: SilibaseCP-3008Composition´╝ÜSpecial Polyether Siloxane Copolymer.Description:SilibaseCP-3008 Silicone Super Wetter is a very low molecular weight ethoxylated polydimethylsiloxane based on a distilled mono-functional trisiloxane intermediate. Therefore SilibaseCP-3008 is a mono- functional, water-dispersible silicone surfactant with excellent surface tension reduction, wetting and super spreading capabilities.Key Features and Typical Benefits:Dispersible ...

Synthesis of Waterborne Polyurethane -- 2023-08-01

Due to the large relative molecular weight of hydroxy silicone oil, the addition amount is small, and the molecules of polyurethane formed are small. Easy to emulsify to produce a blue stable emulsion, when the content increases, the opposite is true. The hydroxyl group is indirectly blocked, and the -OH group in the silicone oligomer diol is connected to the silicon atom through an alkyl or acyl bond. After reacting with -NCO, no Si-O-C bond is formed, and the stability is good. Using polytetra ...

Preparation of Modified Waterborne Polyurethane -- 2023-07-31

When the temperature reaches a certain temperature, the silicon-containing segments in the thin layer below the surface of the film are all migrated to the surface, because the movement of the siloxane segments in the deep layer is restrained and it is difficult to migrate to the surface layer, and the content of the silicon-containing segments on the surface is no longer Significant changes occur, so the contact angle tends to be constant, the higher the content, the denser the hydrophobic laye ...

Preparation of Polyester Polyurethane -- 2023-07-28

Polypropylene glycol ester (PPG), TDI, 3,3-dichloro-4,4-diphenylmethanediamine (MOCA) and hydroxyl silicone oil were used to prepare polyester polyurethane and polyester polysiloxane block polyurethane elastomer by prepolymerization method. The results showed that the mechanical properties of the elastomer were slightly improved after introducing siloxane into the polymer main chain. The introduced polysiloxane chain segment is mainly distributed in the soft segment of the elastomer molecule, wh ...

Preparation of Polyurethane Resin -- 2023-07-27

The crosslinked polyester polysiloxane polyurethane resin was prepared with polyethylene glycol Adipic acid (PE-GA), PDMS-OH, 4,4 '- diphenylmethane diisobalate (MDI) and diglycerol maleate polyol. PDMS-OH has little effect on the mechanical properties of the final material, but it improves the stability and elasticity of the modified resin at low temperatures, and has better thermal stability. They also prepared polysiloxane polyurethane (PDMS PU) block copolymers using PEGA, butanediol CBD, MD ...

China Produce PMS Methylsiliconates an offset against Wacker SILRES BS16 -- 2023-07-26

Product Name: Silicone Waterproof Agent, Methylsiliconates, PMSChemical Name: Potassium Methyl SiliconateItem No: SilibaseWR-0777 Feature:Reduces water absorption into the substrate, thus reducing spalling due to freeze-thaw and efflorescence, thereby increasing the life of the substrate. Colorless and non-yellowing protection preserves the natural appearance of the substrate. Will not form a surface film or gloss. Treated surfaces retain natural vapor permeability. Suitable for interior and ext ...

Organosilicon Compounds to Prepare Polyurethane -- 2023-07-26

Silanol hydroxy terminated siloxane modification method Silanol refers to a siloxane compound with a light group directly connected to a silicon atom. The light group has certain activity and can react with an NCO to obtain modification. Due to poor compatibility between the two, solvents are usually used during the reaction process. The final form is the Si-0-C bond, which has poor hydrolysis resistance and is unstable. A new type of polyurethane was synthesized with polymethyl diphenyl isophor ...

Modification of Silicone Polyurethane -- 2023-07-25

The synthesis of organosilicon modified waterborne polyurethane dispersion (CADPSUR) usually involves two main steps in the preparation of most ADPURs: the participation of oligomer diols in the formation of high molecular weight polyurethane or medium molecular weight polyurethane prepolymers Dispersion in water under shear force. The preparation of ADPUR usually adopts two types of methods: external emulsification method and self emulsification method. External emulsification method is to forc ...

Silicone Modified Polyurethane -- 2023-07-24

Due to the characteristics of its molecular structure, the compatibility of polyurethane and silicone is poor, and the solubility parameters of polyorganosiloxane and polyurethane chain segments differ greatly. The two resins have extremely strong incompatibility. They are in a state of severe phase separation in the blend system, and the mechanical properties of the blend are low. It is necessary to add compatibilizers in the blend system to improve the compatibility of each component of the bl ...

Blending Modification of Polyurethane -- 2023-07-21

Blending modification is simple physical mixing without Chemical bond formation. Due to the significant difference in dissolution parameters between organic silicon compounds and polyurethane compounds (7 5 and 10. 0), the resins have strong immiscibility, resulting in severe phase separation and low mechanical properties of the modified mixture. Therefore, there is currently relatively little research on physically modified polyurethane. The properties of the mixed solution and film of polydime ...

Copyright © 2011-2024 SILIBASE! All Rights Reserved.