Pure organic silicone resin lotion, namely lotion type silicone resin (silicone resin lotion), has been widely used as building paint and adhesive, which has no pollution to the environment, no toxicity to human body, low production cost and good development momentum. The main preparation methods are as follows.(1) Generally, the silicone resin emulsification method is to make silicone resin prepolymer by co hydrolysis and condensation of mixed silica burning monomer, and then emulsified into si ...

MQ resin is a type of organic silicon polymer compound with bright prospects and significant industrial application value. Firstly, it can be mass-produced from cheap water glass, rather than expensive raw materials such as organosilicon metal compounds and silicon; Secondly, unlike other organosilicon resins, it does not require strict control of the raw material ratio during the preparation process; Once again, it is easy to modify and has broad application prospects. The preparation methods o ...

Among organic silicone resins, methyl silicone resin has the lowest carbon content and high heat resistance. The steric hindrance of methyl groups connected to silicon atoms is the smallest, and the resin has high cross-linking degree, high hardness, and low thermoplastic properties. It is a good waterproof and moisture-proof surface coating and adhesive. However, pure methyl silicone resin has poor compatibility with organic compounds, pigments, etc., low thermal elasticity, and limited applica ...

Equivalent of SILRES MSE 100 Silicone ResinProduct Name: Silicone ResinItem No.: SilibaseSR-6321As one good replacement product of Silres MSE 100 can be cured at room temperature, has good activity, high hardness, non-sticky in hot state, low loss of light, and heat. Excellent performance such as non-smoke. Mainly used in the production of high-solids heat-resistant coatings, such as automobile, motorcycle and aircraft parts (such as exhaust systems, mufflers, engine parts), household appliances ...

Silibase Silicone resin is mainly used to prepare silicone insulating paint, silicone coating, silicone adhesive and silicone plastic. High performance coatings such as high-grade building exterior wall coatings are the main market of silicone resin, and the main varieties are modified polyester and modified acrylic resin.Phenyl silicone resin is a silicone resin made by hydrolysis and polycondensation of PhSiX3 (X = Cl, OMe, OEt, etc.). Using the general hydrolysis polycondensation method, the ...

Hydrolysis condensation is the most important process in the synthesis of silicone resin. Generally, the hydrolysis condensation process involves evenly mixing methyl chlorosilane and methyl phenyl chlorosilane in a prescribed proportion with solvents such as toluene and xylene, and slowly adding them to excess water (or water and other solvents) under stirring for hydrolysis. During hydrolysis, maintain a certain temperature, and after hydrolysis, allow to stand until the silica alcohol and aci ...

Product Name: Wetting AgentItem No.: SilibaseCP-0270Product FeaturesSilibaseCP-0270 Substrate Wetting Agent is applicable to water-based base material wetting agent formula, radiation curing wetting agent, solvent-based wetting agent and solvent-free wetting agent (two-component) formula. Especially suitable for automotive paint wetting agent, industrial paint wetting agent, building paint base material wetting agent, decorative paint base material wetting agent.For water-based formula and radia ...

Product Name: Levelling AgentItem No.: SilibaseCP-1333Component: Polyether modified polysiloxaneSilibaseCP-1333 silicone leveling agent is one kind silicone additive to improve wettability and compatibility of solvent-borne systems as well as special coatings.Leveling and wettability of the coating are improved, orange-peel is reduced.Introduction:SilibaseCP-1333 silicone leveling agent can increase the wetting property of the bottom materials by decreasing the surface tension of the coatings. I ...

Description:SilibaseCP-0420 is one liquid rheological agent, used in lotion and water diluted resin systems, to improve anti settling and anti-sagging properties. It is also suitable for water-based color pastes. SilibaseCP-0420 produces a thixotropic effect that can be added later.Product Name: Silicone SurfactantItem No.: SilibaseCP-0420Chemical composition:Modified urea solution.Features and BenefitsAfter mixing and adding to the water-based coating, the additive can form a three-dimensional ...

Application fields of MQ silicone resin1.Silicone pressure sensitive adhesive reinforcing and tackifier:Adjust cohesion, adhesive force, and initial adhesive force;2.Defoamer field:Improve the high temperature resistance, strong alkali resistance, and foam suppression performance of the defoamer;3.Silicone rubber reinforcing filler:Using MQ silicone resin as a reinforcing agent, liquid silicone rubber products have certain mechanical strength and high transmittance, and the rubber compound has g ...