• Silibase Product

    Silibase is one of the leading & professional manufacturers specialized in producing all kinds of SILICONE BASED new materials.

  • Silibase Technique

    Silibase technique team always focus on quality first and insist on developing new products.

  • Silibase Service

    Silibase people will serve you the best before and after sale.

Selection and Evaluation Method of Defoamer:

Oct 12, 2020

The defoamer must be able to spread quickly on the surface of the foam and be able to penetrate quickly to make the foam burst quickly. The commonly used types of defoamers are silicones and polyacrylates.
Silicone defoamers are usually of the polysiloxane type. For example: polydimethylsiloxane containing acrylate functional group and polyether modified polydimethylsiloxane, etc. Silicone has high temperature resistance, low temperature resistance, stable physical properties, chemical inertness, and very low surface tension. It is a commonly used defoamer.
Defoamers such as polyacrylic acid defoam by changing the polarity and molecular weight of the polymer to cause selective incompatibility. The use of such defoamers needs to evaluate the effect on gloss.
To choose a suitable defoamer in the future, the process of foam generation in the system, the compatibility and concentration of the system, temperature and viscosity must be considered. Each of the above factors will have a direct impact on the choice of defoamer.
Evaluation of foam control agents mainly considers the following aspects: spreading rate; compatibility with the system; defoaming stability and cost performance. However, the above factors are often contradictory in a formula. For example, the defoaming stability of the defoaming agent with the best compatibility with the system is often the worst; the least compatible, the spreading rate is often the lowest. fast.
Due to the diversity of coating materials and construction methods, defoamers need to be evaluated based on actual conditions.
1. Add the defoamer to be compared to the varnish according to a certain proportion, put it in a glass bottle, shake in the shaker for 5 minutes, take out the observation at the same time, and initially determine the defoaming ability of the defoamer according to the amount of foam ; After standing for 10 minutes/30 minutes, observe the height of the foam again to compare the defoaming speed;
2. Scrape the paint solution with a scraper fineness meter to determine the compatibility of the defoamer and the system (with or without shrinkage);
3. After the system foam is eliminated, observe the clarity of the system, whether there is turbidity, stratification, oil slick, etc.
4. Storage stability: After being placed for half a month, repeat the 1, 2 and 3 steps to determine the long-term effect of the defoamer
5. Determine the addition amount.

Copyright ©2011-2022 SILIBASE! All Rights Reserved.