Silicone gel formulation is formulated bythe low viscosity of the silicone oil or volatile silicone ring with coach geltype of cosmetic formulation with silicone oil, mainly used for the preparationof skin care and color cosmetics. Preparation of skin care and color cosmeticsto improve the spreadability and refreshing feeling when used, generally needto add low-viscosity silicone oil or volatile silicone epoxy. However, afterthe addition of the viscosity is too low, it is difficult to thicken th ...

Mechanical emulsion formulated siliconeemulsionTypically, the silicone oil emulsionaccording to phase into an oil-in-water and water-in-oil two categories, theformer water as the continuous phase, silicone oil dispersed phase. The lattersilicone oil as the continuous phase, a dispersed phase of water. Silicone oilemulsion cosmetic except a small number of W / O type, the majority of the O /W type. Emulsion characteristics W / O type is a good cleaning effect.Silicone emulsion stability of the em ...

Silicone materials used in cosmetics, inaddition to a variety of silicone oil, cyclic silicone, silicone rubber rawrubber, silicone, most is an emulsion, dispersion, solution, gelling agent,protective film forming agent formulations use .In order to meet the requirements of avariety of cosmetics, so far has developed water-in-oil type silicone oilmicroemulsion, large particle size silicone emulsions, narrow particle sizedistribution of silicone oil emulsion, the oil phase is a silicone oil emuls ...

Aerosol-type silicone release agent isdimethyl silicone oil, methylphenyl silicone oil or long-chain alkyl-modifiedsilicone oil to make the active ingredient. Freon -11 -22 Freon or Freonsubstitutes are packaged together as a propellant in aerosol cans in the dosageform. Tap the hand valve on the tank to the mold surface when using spraycoating, with easy to use features. Adhesion is mainly used to prevent releasemelt-spinning orifice and synthetic fibers of PE, PP, ABS, PS and otherthermoplasti ...

Ointment type silicone release agent is asilicone oil mixed with fumed silica or precipitated silica prepared paste releaseagent. It has a higher ratio of oil type, emulsion type and solution typesilicone releasing agent and releasing heat resistance durability. Suitable forhigh temperature, high pressure molding. Further, since the lubricatingproperty at the same time, especially for bending the hose during vulcanizationof rubber. A release agent can also be used polyester, nylon and othersynth ...

Silicone release agent is a silicone oil asa base oil and the dispersion component, various additives formulated siliconesecondary processing products. Oil type, solution, emulsion, ointment type,aerosol type and delivery type and other forms. Widely used in rubber, plasticsand shell casting and other industries. Compared with other types of siliconeoil release agent release agent, it has the following characteristics: Surfacetension, flow easily show in the detail of the mold can be extremely t ...

Polyether-modified silicone oil at atemperature above its cloud point lost in solubility in water, and can exertanti-foaming, and on dimethyl silicone has a very good ability to emulsify. Thepolyether-modified silicone oil silica silicone paste composition, dubbeddefoamers have good storage stability and dispersibility in water systems. Suchdefoamers commonly referred to as self-emulsifying defoamer. Suchself-emulsifying silicone defoamers defoaming ability and very good defoamingpersistence. An ...

Silica defoamer emulsion is a silicone oilpaste of water in the presence of an emulsifier and emulsified by mechanicalstirring formulated oil-in-water emulsion. Mainly used for defoaming aqueoussystems, in order to adapt to different foaming system, so many varieties oforganic silicon defoamer main product form.The widespread use of low foaming nonionicemulsifiers predicament plate type, polyoxyethylene fatty alcohol ether. Itscontent in the emulsion should be minimal. According to the content o ...

Type silicone oil is directly used asdefoamers, ointment type silicone oil is added to silica dubbed ointment form defoamers,mainly for anti-foaming non-aqueous systems.Silicone oils of different viscosities, thesame mineral oil foaming system showed different anti-foaming effect. Those whohave low viscosity and good defoaming dispersion, but the suppression of persistentlack of bubbles. High viscosity by breaking foam relatively slow, butpersistent good suds.In practice, in order to take into a ...

Silicone defoamers are silicone adddispersing aids prepared for a class of silicone secondary processing products.Oil type, silicone type ointment, solution, emulsion, self-emulsifying type andthe like powdered form. On the tax system and the non-foaming liquid watersystem, there is a very good anti-foaming effect. Widely used in petroleum,chemical, fiber, paper, food, fermentation, drainage and sewage treatment andother industries. Silicone defoamers comparison with other types of defoamers,the ...