China Analogue Wacker E22 Silicone Emulsion with Good compatibility

Product Name: Silicone Emulsion

Item No.: SilibaseSEZ-E022

China Offset of Wacker E22 Silicone Fluid Emulsions with Good wetting and dispersion. SilibaseSEZ-E022 is a hydroxyseal-capped polydimethylsiloxane emulsion that is suitable for cold blending process. Product has excellent wetting and dispersion properties, dilute the low concentration can also have a uniform and smooth film, and has the polydimethyl siloxane separation type and mechanical stress resistance.

Silibase Silicone produce Silicone Fluid Emulsions Substitute for Wacker E22.

Good wetting and dispersion;

Emulsion particle size uniform distribution uniform, good stability;

Disdisplacement and mechanical stress resistance;

Easy to use, can be used directly, or after a simple dilution of the use;

No APEO, NPEO class and other substances, more environmental protection;

Appearance: Pan-blue light milky white liquid

pH Value: 7.5~8.5

Solid content: 40~45%

Viscosity（25℃）: ≤500mpa.s

Ionicity :Anion/non-ion

Water-solubility :An arbitrary ratio to the water is dissolved

Chinese Factory Supply Good compatibility Silicone Fluid Emulsions Countertype to Wacker E22.

SilibaseSEZ-E022 It is a kind of hydroxyl sealing end polydimethyl siloxane emulsion, because contains polydimethyl siloxane composition shows high dissociation and mechanical stress resistance, the emulsion has advantage stability, even high dilution of ready formula is not affected by shear force; in the industrial industry are widely used in rubber vulfide release agent, starch aerosol formula ironing additives, fabric softener formula additives, polyurethane treatment, paint and plastic polishing, printing pulp emulsion, casting release agent (hot box), etc.

• Polyurethane Processing

• Protect & Care

• Slip Emulsions for Printing

1.The specific dosage depends on the type of formula: the recommended addition amount is 0.3% -6%, or depending on the different performance required, but this application method is for reference only, the use of the product must first do a strict feasibility test.

2. It can also be diluted to 0.5-5% with water., Diluted emulsion can be used in areas such as impregnation, painting, or spraying. It is recommended to spray this product, which is the.

Silibase Silicone produce Silicone Fluid Emulsions Substitute for Wacker E22.

A、SilibaseSEZ-E022 In order to achieve the best finishing effect, it is recommended to mix it evenly before use;

B、SilibaseSEZ-E022 is an anion/non-ion product that is compatible with the vast majority of anionic and nonionic additives, but its compatibility must be tested before mixing it safely; while avoiding directly exposing the diluent or compound solution of the product itself to the air for a long time;

C、SilibaseSEZ-E022 at the same time, there is a concentration gradient during storage, which is a normal phenomenon, and it can be shaken or stirred evenly before use, which will not affect the performance of the product;

The product can be stored in the original closed container at 5℃ ~30℃ for at least December, and the storage time of more than December does not mean that the product can not continue to be used, but in this case, in order to ensure the quality of the product, it is necessary to re-check the relevant properties of the product. Longterm exposure to extreme cold and hot environments should be avoided, which may lead to emulsion delamination and oil bleaching. In order to ensure product quality,the container should be used up as soon as possible after opening, and the container lid should be closed tightly when not in use.

When you consider using any SILIBASE SILICONE Chemicals Limited products,please check the latest Material Safety Date Sheet （ MSDS ） before using to ensure your safe use ， You can contact the nearest SILIBASE SILICONE Chemicals Limited business representatives and request the product Material safety Data Sheet and any other relevant safety information .Please before use of all of the products mentioned in the text ,read and understand all relevant product safety information and take the necessary security measures to ensure the safety of use.