Another outstanding performance silicone resin is its excellent electrical insulation properties, insulation performance rating is 180 ℃,Is a H-class insulating material, the dielectric constant, dielectric loss, insulation resistance varies between 0 ~ 250 ℃ does notLarge, is a good high temperature electrical insulation coating, long-term use at 200 ℃. Coating and has moisture resistanceWet, acid and alkali resistance, radiation resistance, ozone resistance, corona resistance, flame resista ...

In the process of industrial production, if a large number of bubbles exist, it will bring a lot of troubles to the production process, for example, the production capacity will be greatly restricted; the waste of raw materials and products will be caused; the quality of products will be affected; the environment will be polluted, So if it can not be properly resolved, it is no exaggeration to say that the "bubble" will become our stumbling block and become a "bottleneck" in ...

Polyether modified silicone, polyether segment is introduced into the siloxane molecules obtained polyether - siloxane copolymer (referred to as silicone ether copolymer). Polyether modified silicone defoamer is the combination of the advantages of both a new type of highly efficient defoamer. It is the choice of polyether with strong anti-foam ability and strong hydrophobic, rapid breaking silicone oil as the main component, matching silicone oil and polyether can be combined with emulsifiers, ...

Silicone rubber adhesive is used in silicone and nylon, plastic adhesive professional adhesive, high and low temperature (-60 ~ 200 ℃), ozone resistance, excellent UV resistance and electrical insulation. Widely used in electronics, electrical appliances, automobiles, instruments, machinery, chemical and other bonding. The following is a case of silicone and metal bonding.With the development of aerospace industry and electronics industry, a new type of high temperature resistant rubber and hig ...

Silicone resin is mainly used for the preparation of silicone insulation paint, silicone coatings, silicone adhesives and silicone plastics. High-end architectural coatings such as high-performance coatings is the main market silicone, the main varieties of modified polyester and modified acrylic resin. In addition, the consumption of silicones in the electronic / electrical industry is growing rapidly, which is also an important driving force for the development of global silicones in the futur ...

Silicone surfactant is a new type of pesticide adjuvant developed in the mid 60s of last century. It is often used as a spray auxiliary for pesticides. It has good wettability, strong adhesion, excellent ductility and high Stomatal permeability and other advantages, added to the pesticide can play a saving, provincial and provincial workers synergistic effect.    Silicone is a kind of siloxane surfactant, which can be used as assistant of pesticide, which can greatly reduce the surface ...

Message about hair loss caused by silicone oil. Silicone oil is a macromolecular substance, will not be absorbed by hair follicles. Not much silicone oil in shampoo, surfactant cleaning, plus a lot of water rinse, the basic will not remain in the head. In fact, many causes of hair loss, such as endocrine disorders caused by seborrheic alopecia, mental stress, and even postpartum physiological hair loss, hair follicle blockage is not a cause of hair loss.The effect of PDMS hair care is obvious, e ...

Silicone grease is refined synthetic oil as the basis of thick oil thickening agent, and added a structural stabilizer, anti-corrosion additives refined, with good water tightness, waterproof, solvent resistance and creepage resistance, non-corrosive Metal, with rubber and more have better adaptability, for sanitary equipment, seals, electrical and electronic industry waterproof seal and lubrication.Thermal grease, common name also known as thermal paste, is a special silicone oil as a base oil, ...

Wall material to absorb moisture will cause serious damage to the wall itself, the wall water through the use of a smooth channel in the form of water vapor from the wall material in the volatile. Therefore, reducing the water absorption of building materials, to give external wall material "breathing" function, is an important way to improve building decoration, waterproof performance. Silicone coatings with a certain reactive groups of organopolysiloxane as the main film-forming mate ...

Defoamers are added to the system with high shear, but excessive shear forces weaken the defoaming effect. Defoamer over-dispersion and poor dispersion, are not conducive to the effectiveness of defoamers play, add defoamer when using a relatively low shear force, the initial defoaming effect may be good, but after the storage phase, defoaming The effect of the agent may be reduced.In general, defoamers are designed to be used in the state of supply. If the shear force is insufficient when ...