Silicone release paper with a releasing agentThe release paper with the release agent can be broadly divided into organic and non-organic silicon silicon two categories. Non-silicone-based and most important difference is that the silicone release properties. The former heavy peel force, mainly for engineering the release paper. Process for the production of synthetic leather and plastic composite film. The latter peel force, and can be adjusted to the weight of the peel force. Can adapt to a va ...

Polyurethane foam stabilizerOne of the main purposes of the polyether-modified silicone oil, as a surfactant for polyurethane foam stabilizer, and as foam stabilizers. In the formation of foamed polyurethane foam formulations, although its addition amount is limited, but it is a very important ingredient. Polyether modified silicone oil in the production process of polyurethane foam during four.From a combination of co-emulsification when mixing feedThe main raw material compatibility polyether ...

Hydrophobic silicone oil and mold releaseSilicone oil has a very good hydrophobicity. The so-called hydrophobic liquid means water wettable silicone oil / air interface reached only to a lesser extent. Size of the contact angle of water droplets on the surface and the surface is a measure of surface hydrophobicity. The contact angle θ is greater than 90 °, preferably represents a hydrophobic, θ less than 90 °, showing poor aqueous genus.After viscosity (25 ℃) as dimethicone 100mm2 ...

Grease and oil-based defoamersType silicone oil is directly used as defoamers, ointment type silicone oil is added to silica dubbed ointment form defoamers, mainly for anti-foaming non-aqueous systems.Silicone oils of different viscosities, the same mineral oil foaming system showed different anti-foaming effect. Those who have low viscosity and good defoaming dispersion, but the suppression of persistent lack of bubbles. High viscosity by breaking foam relatively slow, but persistent good suds. ...

Grease and oil-based defoamersType silicone oil is directly used as defoamers, ointment type silicone oil is added to silica dubbed ointment form defoamers, mainly for anti-foaming non-aqueous systems.Silicone oils of different viscosities, the same mineral oil foaming system showed different anti-foaming effect. Those who have low viscosity and good defoaming dispersion, but the suppression of persistent lack of bubbles. High viscosity by breaking foam relatively slow, but persistent good suds. ...

Amino-modified polyorganosiloxane further modified softening agentIn the preparation of amino-modified polysiloxane softener in the textile industry, a great amount, through which finished fabric has good soft, smooth effect. However, due to the nature of their ammonia hydrocarbon, such softeners are also some disadvantages. To improve the stability of ammonia hydrocarbon susceptible to oxidation resistance and the work with the bath. Improve the finished fabric yellowing resistance, water ...

White carbon black silicone pasteWhite carbon black silicone paste using silica thickened silicone paste products, with very good heat resistance, dielectric properties, oxidation resistance. Over a wide temperature range consistency changes little, little change in electrical properties. By varying the silicone oil, white carbon species such as the addition amount of the silicone paste can be formulated for various uses.Electrical insulation, sealing with silicone paste, is mainly used for elec ...

Silicone resin.Silicone resin (or silicon resin) Silicone polymer is an important part of the Si-O-Si as the main chain, the silicon atoms associated with organic groups, with highly cross-linked semi-inorganic polymers, it Is hydrolyzed from a polyfunctional organosilane to form a silicone prepolymer which is further crosslinked under heating or catalyst catalysis to an insoluble, non-molten solid silicone resin having a three-dimensional network structure. It may be a homopolymer of a monomer, ...

Silicone resin.Silicone resin (or silicon resin) Silicone polymer is an important part of the Si-O-Si as the main chain, the silicon atoms associated with organic groups, with highly cross-linked semi-inorganic polymers, it Is hydrolyzed from a polyfunctional organosilane to form a silicone prepolymer which is further crosslinked under heating or catalyst catalysis to an insoluble, non-molten solid silicone resin having a three-dimensional network structure. It may be a homopolymer of a monomer, ...

Silicone oilSilicone oil is a polyorganosiloxane with different degree of polymerization and chain structure. The most commonly used silicone oil is methyl silicone oil. Silicone oil is generally colorless (or light yellow), tasteless, non-toxic, non-volatile liquid. Silicone oil insoluble in water, methanol, diol and - ethoxy ethanol, with benzene, dimethyl ether, methyl ethyl ketone, carbon tetrachloride or kerosene miscible, slightly soluble in acetone, dioxane, ethanol and alcohol . It has a ...