Aerosol-type silicone release agentAerosol-type silicone release agent is dimethyl silicone oil, methylphenyl silicone oil or long-chain alkyl-modified silicone oil to make the active ingredient. Freon -11 -22 Freon or Freon substitutes are packaged together as a propellant in aerosol cans in the dosage form. Tap the hand valve on the tank to the mold surface when using spray coating, with easy to use features. Adhesion is mainly used to prevent release melt-spinning orifice and synthetic f ...

Solvent type addition cure silicone releasing agentSolids solvent-addition silicone release agent is generally 30%. When diluted with toluene, n-hexane, etc. to a solid content of 2% to 10%, dubbed a catalyst coating liquid. To minimize the amount of solvent can also be formulated as solids content of the coating liquid 10% to 30%. Concentration or viscosity of the coating liquid to the substrate wettability, curing and the use of others have subtle effects. It is generally the concentration sho ...

Hair combingCombing the hair test is an important indicator of the effect of shampoo conditioner. It refers to the resistance encountered when the size of the comb through the hair. It is not only the hair diameter, stiffness, curl, length, humidity, and comb material, density and size of the properties and other factors. Also shampoo and wash your hair after flowing resistance, smoothness and moisturizing properties and other factors. In the precursor hair and comb determined combing factors ma ...

Silicone elastomers decorative coatingsFlexible silicone latex decorative coatings is to introduce a silicone bond in the acrylic resin polymerized into the new film material. Add silicone improved weathering resistance and durability of an acrylic resin, coating an elongation of 700% to 300%, fine cracks mask wall, the coating layers to improve the decorative features. General multi-step emulsion polymerization into a composite polymer latex, the center of a hard resin. Compared with ordinary g ...

Application of silicone resinSilicone resin is excellent in thermal oxidation stability, cold resistance, weather resistance, electrical insulation, water repellency and releasability release the like. Accordingly, the silicone is widely used as insulation resistance, high temperature paint. Such as H-class electrical appliances used to impregnate the coil to fill up with insulation, impregnating glass cloth, glass and asbestos cloth, made of high-voltage motors main insulation mica plate and mi ...

Solvent type addition cure silicone releasing agentSolids solvent-addition silicone release agent is generally 30%. When diluted with toluene, n-hexane, etc. to a solid content of 2% to 10%, dubbed a catalyst coating liquid. To minimize the amount of solvent can also be formulated as solids content of the coating liquid 10% to 30%. Concentration or viscosity of the coating liquid to the substrate wettability, curing and the use of others have subtle effects. It is generally the concentration sho ...

Mechanical emulsion formulated silicone emulsionTypically, the silicone oil emulsion according to phase into an oil-in-water and water-in-oil two categories, the former water as the continuous phase, silicone oil dispersed phase. The latter silicone oil as the continuous phase, a dispersed phase of water. Silicone oil emulsion cosmetic except a small number of W / O type, the majority of the O / W type. Emulsion characteristics W / O type is a good cleaning effect.Silicone emulsion stability of ...

Polyurethane foam stabilizerOne of the main purposes of the polyether-modified silicone oil, as a surfactant for polyurethane foam stabilizer, and as foam stabilizers. In the formation of foamed polyurethane foam formulations, although its addition amount is limited, but it is a very important ingredient. Polyether modified silicone oil in the production process of polyurethane foam during four.From a combination of co-emulsification when mixing feedThe main raw material compatibility polyether ...

White carbon black silicone pasteWhite carbon black silicone paste using silica thickened silicone paste products, with very good heat resistance, dielectric properties, oxidation resistance. Over a wide temperature range consistency changes little, little change in electrical properties. By varying the silicone oil, white carbon species such as the addition amount of the silicone paste can be formulated for various uses.Electrical insulation, sealing with silicone paste, is mainly used for elec ...

Hydrophobic silicone oil and mold releaseSilicone oil has a very good hydrophobicity. The so-called hydrophobic liquid means water wettable silicone oil / air interface reached only to a lesser extent. Size of the contact angle of water droplets on the surface and the surface is a measure of surface hydrophobicity. The contact angle θ is greater than 90 °, preferably represents a hydrophobic, θ less than 90 °, showing poor aqueous genus.After viscosity (25 ℃) as dimethicone 100mm2 ...