Silibase is one of the leading & professional manufacturers specialized in producing all kinds of SILICONE BASED new materials.
Silibase technique team always focus on quality first and insist on developing new products.
Silibase people will serve you the best before and after sale.
Vinyl undergoes free radical polymerization under the action of an initiator, grafting siloxane onto the polyurethane chain for modification. A new type of organic silicone polyol with high cohesion was synthesized through solution polymerization using acrylic epoxy resin (AE) and vinyl trimethoxysilane (VTMS) as monomers. Ammonia based organic silane was reacted with polyurethane prepolymer to study the heat resistance of the modified polyurethane. The results showed that:, The heat resistance ...
The step-by-step feeding method can be further divided into two types: one is that after the reaction between isocyanate monomer and polyester is almost complete, organic siloxane is first added to expand the chain, and then CDMPA is added to introduce - COOH group; Another method is to introduce - COOH group with dithiomethylpropionic acid (DMPA) after the reaction between isocyanate monomer and polyester is almost complete, and then add organic siloxane to expand the chain.The load obtained fr ...
Due to the structure and properties similar to dendritic polymers, hyperbranched polymers have a large number of cavities, branching points, and a nearly spherical structure, and their preparation steps are simple without the need for purification. However, hyperbranched polymers and dendritic polymers cannot be directly used as materials due to the lack of molecular chain entanglement. Grafting linear polyurethane onto hyperbranched polymers not only endows them with certain mechanical properti ...
The researchers used KH550 (3 aminopropylethoxysilane), HEA (2 hydroxyethyl acrylate), IPDI (isophorone diisoalate), PE0400 (polyethylene oxide 400) as raw materials to synthesize A high molecular polymer containing silicon in the side chain was discovered, and a material containing Si—(}—Si was produced after hydrolysis and condensation. It was first discovered that the material has good shape retention, and the effect of PU/PE ratio on shape retention and vitrification was studied. Effect of ...
The application of silane coupling agent in polyurethane adhesive is to add a silane coupling agent containing active end group -OH or -N pressure to the polyurethane prepolymer with terminal NCO group, or add a silane coupling agent with terminal OH group to the polyurethane prepolymer with terminal OH group. Add an organosilane coupling agent containing NCO groups. In this way, the NCO-terminated or OH-terminated polyurethane prepolymer is modified into a silicon ester-terminated prepolymer.Th ...
Using secondary amine-terminated polyamine and/or PT-MO to react with MDI, BD as a chain extender, dimethylacetamide and toluene as solvents, a polyurethane choroider and a glass with soft segment PDMS can be observed The temperature change (8) and change with the components, the results show that the PDMS phase is separated from the PTMO and hard segments. The permeability of block copolymers to gases and liquids is reviewed. It is mentioned that the separation membrane of the ethanol/water mix ...
Use polyester 210, TOI and tertiary amine to react the prepolymer, and then react the prepolymer with bisaminopropyl polydimethylsiloxane and a small amount of dimethylpropionic acid (DMPA) in catalyst and toluene The cationic modified polyurethane emulsion is prepared, and active groups are introduced into the soft segment, such as -CN, -NCO, which is conducive to the increase of the interaction between the soft and hard segments. The product can be used as a waterproof brightener (that is, a t ...
Synthesized using aminoethylaminopropyl polydimethylsiloxane (CAE-PS), 2,4-toluene diisoacrylate (TOI), polypropylene glycol (NZOO) and dihydroxymethylpropionic acid (DMPA). For water-based polyurethane, the study found that after modification, the glass transition temperature of both hard and soft segments increases, and the increase of the hard segment is more obvious than that of the soft segment. The organosilicon is suspended on the side chain of the polyurethane hard segment, which has lit ...
Synthesized using aminoethylaminopropyl polydimethylsiloxane (CAE-PS), 2,4-toluene diisoacrylate (TOI), polypropylene glycol (NZOO) and dihydroxymethylpropionic acid (DMPA). For water-based polyurethane, the study found that after modification, the glass transition temperature of both hard and soft segments increases, and the increase of the hard segment is more obvious than that of the soft segment. The organosilicon is suspended on the side chain of the polyurethane hard segment, which has lit ...
Product Name: Silicone SurfactantItem No.: SilibaseCP-3008Composition：Special Polyether Siloxane Copolymer.Description:SilibaseCP-3008 Silicone Super Wetter is a very low molecular weight ethoxylated polydimethylsiloxane based on a distilled mono-functional trisiloxane intermediate. Therefore SilibaseCP-3008 is a mono- functional, water-dispersible silicone surfactant with excellent surface tension reduction, wetting and super spreading capabilities.Key Features and Typical Benefits:Dispersible ...