The alkoxysilane hydrolysis condensateobtained low R / Si values silicone resin, the substrate having good adhesion. Aftercuring, the glass-like appearance, it is also called glass resin. Glass resinafter curing, the film hard, scratch-resistant, heat, cold, solvent resistance,water resistance is excellent and highly transparent in the visible lighttransmission rate of 90%. No gas released during use, even at 450 ℃, highvacuum condition and the electron irradiation does not produce gas. It also ...

Silicone resin has excellent heatresistance, cold resistance, weatherability, hydrophobic and othercharacteristics, in addition to obtain a colorless and transparent and has goodadhesion and abrasion resistance of the coating. It occupies an importantposition in specialty coatings industry.Silicone-based materials, addingheat-resistant pigments, solvents, curing agents and other additives formulatedhigh temperature coating, can be prolonged use in 250 ~ 400 ℃, andmaintains its color and gloss. ...

Silicone resin is excellent in thermaloxidation stability, cold resistance, weather resistance, electricalinsulation, water repellency and releasability release the like. Accordingly,the silicone is widely used as insulation resistance, high temperature paint. Suchas H-class electrical appliances used to impregnate the coil to fill up withinsulation, impregnating glass cloth, glass and asbestos cloth, made ofhigh-voltage motors main insulation mica plate and mica shaped materials. Adhesiveglass ...

Electrical appliances volume, quality andservice life, largely determine the performance in the electrically insulatingpaint materials. Generally speaking, the higher the heat resistance of theinsulating material, under the same power conditions, the volume of electricalappliances can be made smaller, light weight and longer service life. Insulationmaterial is usually made with insulating paint and an organic or inorganicmaterial together. Made of pure silicone and inorganic materials withelectr ...

As cleaning of personal items mainlyinclude shampoo, shower gel and facial cleanser and the like. In addition torequiring a clean, foaming and wetting capabilities, the current mainconsideration is the skin mildness. This requires that the surfactant does notdamage the skin cells, the protein does not play a role in the skin, or lessimpervious to penetrate into the skin, the skin oils and to maintain normalskin itself. Anionic surfactants for cleaning has a long history. Decontaminationsoap is d ...

Non water-soluble substance in water andhomogeneously emulsified to form an emulsion of the phenomenon knownemulsification. Emulsifier in cosmetics mainly for the production of creams andlotions. Common silty neutral cream and cream are 0 / W type emulsion, ananionic emulsifier fatty acid soap (soap) emulsified with soap emulsionpreparation less oil emulsion easier, and soap gelling can it has a greaterviscosity. For a large number of cold cream containing oil phase of theemulsion mostly w / O t ...

A monomer emulsion and water allocationunder the emulsifier into the emulsion, polymerization initiator was added at acertain temperature. The system is mainly composed of monomer, water,emulsifier and initiator composed of four basic components. Emulsionpolymerization process is divided by the use of a batch process,semi-continuous, continuous, top seed emulsification and emulsionpolymerization method. Press the nucleation mechanism is divided into micellarnucleation, homogeneous nucleation and ...

Combing the hair test is an importantindicator of the effect of shampoo conditioner. It refers to the resistanceencountered when the size of the comb through the hair. It is not only the hairdiameter, stiffness, curl, length, humidity, and comb material, density andsize of the properties and other factors. Also shampoo and wash your hair afterflowing resistance, smoothness and moisturizing properties and other factors. Inthe precursor hair and comb determined combing factors mainly shampoo catio ...

A monomer emulsion and water allocationunder the emulsifier into the emulsion polymerization initiator is added at acertain temperature. The system is mainly composed of monomer, water,emulsifier and initiator composed of four basic components. Emulsionpolymerization process is divided by the use of a batch process,semi-continuous, continuous, top seed emulsification and emulsionpolymerization method. Press the nucleation mechanism is divided into micellarnucleation, homogeneous nucleation and d ...

Silicone is a kind of variety, excellentperformance, good safety and wide application of new special polymer compositematerials. At present, all kinds of silanes, siloxanes intermediates preparedby their silicone oil, silicone rubber, silicone resin, a silane coupling agentand ghost emulsion products. It has been widely used in electrical andelectronics, construction, automotive, textile, light industry, cosmetics,medical, food and other industries, and has played an active role. So far, ithas s ...