Silibase is one of the leading & professional manufacturers specialized in producing all kinds of SILICONE BASED new materials.
Silibase technique team always focus on quality first and insist on developing new products.
Silibase people will serve you the best before and after sale.
Product Introduction
It is a special polymer ester compound.
Application
1. It is suitable for soft finishing in printing and dyeing factories of cotton, hemp, chemical fiber and blended fabrics
2. It can be used to compound with silicone oil into softener, ointment and hair-raising agent.
Usage Amount for Reference
Dilute method:
Dipping method 1to10 dilute liquid dosage: 3～10% (o.w.f)
Temperature: 40～50℃
Bath ratio: 1:10～15
Time: 30min
Padding method 1 to 10 dilute liquid dosage: 20 ~ 50 g/L
Note: The specific use should be handled by the user according to the situation of the sample.
Package
25Kg/Bag
Storage
Waterproof, prevent extrusion, stacking height should not exceed 8 layer, unfavorable temperature above 35 ℃. One year of storage period.
Suggestion: Dilution should be finished one-time or must be sealed.
Operation Process
1. Add room temperature water, turn on low-speed stirring to form a vortex.
2. Slowly add the weighed film, turn on the heating device at the same time, raise the temperature to 65-70℃, and adjust the speed according to the situation.
3. The soft tablet gradually dissolves into a milky white liquid, until it iscompletely dissolved, stop stirring.
4. Cool down to the safe temperature of human body, filter out the material, and store it with a cover.
Dilution Method
Example: open dilute product:1 to 10
Feeding:
SilibaseTXR-SFE: 100kg
Water: 900kg
Total: 1000kg
Cold water melt process
Turn on the stirring and slowly add the film to the water at about 30℃ in proportion, stir and
disperse and soak for 2 hours, (or soak overnight) and then stir at low speed until it is
completely dissolved for later use (the stirring speed is fast and the foam is more).
Remark
1. Be sure to clean the chemical container before mixing to avoid problems with the chemical.
2. If it is mixed with other auxiliaries, please inform the laboratory in advance to do the test, so as to avoid the problem of unstable compounding between the auxiliaries.
3. A small amount of insoluble flakes may be attached to the stirring shaft, or filter flakes out that have not been subjected to stirring shearing force.
4. It is best to use up the dissolved emulsion at one time. If it is not used up, it must be sealed and stored.