Product Name: Silicone Oil
Item No.: SilibaseTXR-2460
Product category: PES Silicone Oil
Basic CharacterAppearance: transparent light yellow liquid
Ionicity: Weak cation
Solid content: 68%—70% (105℃, 3 hours)
Application
Polyester, TC, TR, NR fabrics and plush fabrics
Advantage 1. Gives the chemical fiber fabric a smooth and soft hand, and has a fluffy effect on the fleece fabric.
2. It has self-emulsifying properties, no emulsifier is used, and it is used for dilution with a high-speed disperser.
Application Comparison
Compared with conventional block silicone oil, SilibaseTXR-2460 is more soft and slippery.
| Fabric | SilibaseTXR-2460 | SilibaseTXR-2480 |
Polyester knitted | Polyester knitted | ++++ | +++ |
NR Roman Cloth | Soft & smooth | ++++ | ++++ |
flannel | Soft & smooth | +++++ | +++ |
Note:+++++is the best, +is the worst. |
Application SolutionSilibaseTXR-2460 can be mixed with fluffy silicone oil emulsion to achieve the ultimate soft, smooth and fluffy effect.
| Fabric | SilibaseTXR-2460 | SilibaseTXR-2469+SilibaseTXR-2460=1+1 |
Polyester knitted | Soft & smooth | ++++ | ++++ |
| Fluffy & elastic | +++ | ++++ |
NR Roman Cloth | Soft & smooth | ++++ | ++++ |
| Fluffy &elastic | +++ | ++++ |
flannel | Soft & smooth | +++++ | +++++ |
| Fluffy &elastic | ++++ | +++++ |
Note:+++++is the best, +is the worst. |
Usage amount for reference(1) Dipping method: SilibaseTXR-2460 diluted solution 3~5% (o.w.f)
(2) Padding method: SilibaseTXR-2460 diluted solution 10~30 g/L
Package50kg/100kg plastic barrel
StorageStore in cool and ventilated warehouse. 6months of storage period.
FeedingSilibaseTXR-2460 Crude oil: 100kg
Glacial acetic acid: 2kg
Water: 300kg
Operation Process1. Add SilibaseTXR-2460 crude oil into the stirring tank and start stirring for 5 minutes.
2. Add 2 kg of acid, stir for 5 minutes, stir and disperse evenly.
3. Add 20kg, 20kg, 30kg, 30kg of water in 4 times in sequence, and stir for 15-20 minutes after each addition of water, stir and disperse evenly.
4. Add 50kg of water in 2 times, stir for 10-15 minutes after each addition of water, stir and disperse evenly.
5. After adding the remaining water at a constant speed, stir for another 5 minutes.
6. Stop the machine, check the emulsion, and adjust the pH to 5-6.
Note:A high-speed disperser must be used for emulsification, and the speed can be adjusted by adding water for the last time.