Performance comparable to XIAMETER™ AFE-1247 Antifoam Emulsion with Good Compatibility.
Dec 4, 2024
Product Name: Defoamer
Item No.: SilibaseDFS-1247
Description
Chinese Company Sell Defoamer Analogue for XIAMETER™ AFE-1247 Antifoam Emulsion.Replacement product for Excellent shear stability XIAMETER™ AFE-1247 Antifoam Emulsion.SilibaseDFS-1247 defoaming emulsion has excellent shear and dilution stability, good long-term defoaming ability, and can be used in various systems such as anionic and non-ionic systems. It can be stored stably after being added to the system, with less floating oil and less impact on appearance.
Technical Index
Appearance | Light yellow slightly transparent |
ingredient | Modified polysiloxane |
Non-volatile matter content | 60±1% |
Ph value | 8~10 |
Emulsion ionic type | Weak anion |
Specific gravity at 25°C (77°F): | 1.0 |
pH at 25°C (77°F): | 8.0 |
Ionic properties: | Nonionic |
Diluent: | Water |
Note: The values listed in this data sheet only describe the properties of this product and do not represent the specification range. The solid content can be adjusted accordingly according to customer needs.
Main Features:
Silibase Silicone produces an antifoam emulsion with comparable Similar as XIAMETER™ AFE-1247 defoamer .
Excellent shear stability and dilution stability
Low viscosity
Easy to use
Superior pruning stability
Unique and rare characteristics
Good long-lasting antifoaming property
Good compatibility in most systems and easy to use
Compatibility in majority system
Less impact on system transparency under the same defoaming performance conditions
Application
Analogue for XIAMETER™ AFE-1247 Anti-foaming emulsion with good viscosity properties.
Water-soluble and dispersible metalworking fluids
Water-based coatings and inks, cleaning agents
Application Method:
It can be added after the foam is generated or added to the product as a foam suppressant. The amount used depends on the foam situation on site. The recommended amount is 0.1% to 1%, and the final amount is added according to the actual situation. The dilution water temperature should preferably be lower than 35°C.
Long-term storage may cause stratification, but it does not affect the quality. Please stir evenly before use.
Packaging and Storage:
This product is packaged in 50KG, 200KG plastic barrels or according to customer requirements.
The product should be stored at 0-40℃ in the original unopened container. The original sealed product will work better within 6 months. Avoid extreme storage environments.
Safety of Use:
This product has not been tested nor claimed to be suitable for medical, pharmaceutical or food use.
Notes:
* These recommendations and data are based on information we believe to be reliable and do not provide any guarantee, because we cannot control the conditions and methods of using the products. The above shall not be regarded as a reason for infringement of any patent rights of our company.
* In order to achieve better desired performance, we recommend that the product be fully tested before use. Our company is not responsible for any indirect or incidental damages.
