• Silibase Product

    Silibase is one of the leading & professional manufacturers specialized in producing all kinds of SILICONE BASED new materials.

  • Silibase Technique

    Silibase technique team always focus on quality first and insist on developing new products.

  • Silibase Service

    Silibase people will serve you the best before and after sale.

Such as paraffin-like nature

Oct 19, 2018

Hydrophobic silicone oil and mold release

Silicone oil has a very goodhydrophobicity. The so-called hydrophobic liquid means water wettable siliconeoil / air interface reached only to a lesser extent. Size of the contact angleof water droplets on the surface and the surface is a measure of surfacehydrophobicity. The contact angle θ is greater than 90 °, preferably representsa hydrophobic, θ less than 90 °, showing poor aqueous genus.

After viscosity (25 ) asdimethicone 100mm2·S-1 treated glass, ceramics, etc., its hydrophobicsurface can reach the level of paraffin, the contact angle between 90 ° ~ 100°. Treatment is immersed in a silicone oil defatted glass mass fraction of 0.5%of the chloroform solution, and after removing the solvent allowed toevaporate, then heat treated. The heat treatment temperature is 100 , thecontact angle of water droplets of about 60 °. Heat treatmenttemperature is 400 , the contact angle of up to 100 ° ~ 110 °. When theheat treatment temperature exceeds 400 °, the decomposition bypolydimethylsiloxane, the contact angle becomes smaller.

Hydrophobic treatment mechanism dimethiconeis by heat treatment (350 ~ 400 ) siloxane even point to the phase interface, the free surface ismethylated with close-packed way covered.

Hydrophobic nature is closely related tothe dimethyl silicone adhesive material or anti-stick release is very good.Hydrophobic, as a manifestation of this nature is polyorganosiloxane basicchemical properties(Such as paraffin-like nature, saturation characteristics ofmolecules and the corresponding small van der Waals forces).